Exasol connector#

The Exasol connector allows querying an Exasol database.

Requirements#

To connect to Exasol, you need:

  • Exasol database version 7.1 or higher.

  • Network access from the Trino coordinator and workers to Exasol. Port 8563 is the default port.

Configuration#

To configure the Exasol connector as the example catalog, create a file named example.properties in etc/catalog. Include the following connection properties in the file:

connector.name=exasol
connection-url=jdbc:exa:exasol.example.com:8563
connection-user=user
connection-password=secret

The connection-url defines the connection information and parameters to pass to the JDBC driver. See the Exasol JDBC driver documentation for more information.

The connection-user and connection-password are typically required and determine the user credentials for the connection, often a service user. You can use secrets to avoid using actual values in catalog properties files.

Note

If your Exasol database uses a self-signed TLS certificate you must specify the certificate’s fingerprint in the JDBC URL using parameter fingerprint, e.g.: jdbc:exa:exasol.example.com:8563;fingerprint=ABC123.

Data source authentication#

The connector can provide credentials for the data source connection in multiple ways:

  • inline, in the connector configuration file

  • in a separate properties file

  • in a key store file

  • as extra credentials set when connecting to Trino

You can use secrets to avoid storing sensitive values in the catalog properties files.

The following table describes configuration properties for connection credentials:

Property name

Description

credential-provider.type

Type of the credential provider. Must be one of INLINE, FILE, or KEYSTORE; defaults to INLINE.

connection-user

Connection user name.

connection-password

Connection password.

user-credential-name

Name of the extra credentials property, whose value to use as the user name. See extraCredentials in Parameter reference.

password-credential-name

Name of the extra credentials property, whose value to use as the password.

connection-credential-file

Location of the properties file where credentials are present. It must contain the connection-user and connection-password properties.

keystore-file-path

The location of the Java Keystore file, from which to read credentials.

keystore-type

File format of the keystore file, for example JKS or PEM.

keystore-password

Password for the key store.

keystore-user-credential-name

Name of the key store entity to use as the user name.

keystore-user-credential-password

Password for the user name key store entity.

keystore-password-credential-name

Name of the key store entity to use as the password.

keystore-password-credential-password

Password for the password key store entity.

General configuration properties#

The following table describes general catalog configuration properties for the connector:

Property name

Description

case-insensitive-name-matching

Support case insensitive schema and table names. Defaults to false.

case-insensitive-name-matching.cache-ttl

Duration for which case insensitive schema and table names are cached. Defaults to 1m.

case-insensitive-name-matching.config-file

Path to a name mapping configuration file in JSON format that allows Trino to disambiguate between schemas and tables with similar names in different cases. Defaults to null.

case-insensitive-name-matching.config-file.refresh-period

Frequency with which Trino checks the name matching configuration file for changes. The duration value defaults to 0s (refresh disabled).

metadata.cache-ttl

Duration for which metadata, including table and column statistics, is cached. Defaults to 0s (caching disabled).

metadata.cache-missing

Cache the fact that metadata, including table and column statistics, is not available. Defaults to false.

metadata.schemas.cache-ttl

Duration for which schema metadata is cached. Defaults to the value of metadata.cache-ttl.

metadata.tables.cache-ttl

Duration for which table metadata is cached. Defaults to the value of metadata.cache-ttl.

metadata.statistics.cache-ttl

Duration for which tables statistics are cached. Defaults to the value of metadata.cache-ttl.

metadata.cache-maximum-size

Maximum number of objects stored in the metadata cache. Defaults to 10000.

write.batch-size

Maximum number of statements in a batched execution. Do not change this setting from the default. Non-default values may negatively impact performance. Defaults to 1000.

dynamic-filtering.enabled

Push down dynamic filters into JDBC queries. Defaults to true.

dynamic-filtering.wait-timeout

Maximum duration for which Trino waits for dynamic filters to be collected from the build side of joins before starting a JDBC query. Using a large timeout can potentially result in more detailed dynamic filters. However, it can also increase latency for some queries. Defaults to 20s.

Domain compaction threshold#

Pushing down a large list of predicates to the data source can compromise performance. Trino compacts large predicates into a simpler range predicate by default to ensure a balance between performance and predicate pushdown. If necessary, the threshold for this compaction can be increased to improve performance when the data source is capable of taking advantage of large predicates. Increasing this threshold may improve pushdown of large dynamic filters. The domain-compaction-threshold catalog configuration property or the domain_compaction_threshold catalog session property can be used to adjust the default value of 32 for this threshold.

Case insensitive matching#

When case-insensitive-name-matching is set to true, Trino is able to query non-lowercase schemas and tables by maintaining a mapping of the lowercase name to the actual name in the remote system. However, if two schemas and/or tables have names that differ only in case (such as “customers” and “Customers”) then Trino fails to query them due to ambiguity.

In these cases, use the case-insensitive-name-matching.config-file catalog configuration property to specify a configuration file that maps these remote schemas/tables to their respective Trino schemas/tables:

{
  "schemas": [
    {
      "remoteSchema": "CaseSensitiveName",
      "mapping": "case_insensitive_1"
    },
    {
      "remoteSchema": "cASEsENSITIVEnAME",
      "mapping": "case_insensitive_2"
    }],
  "tables": [
    {
      "remoteSchema": "CaseSensitiveName",
      "remoteTable": "tablex",
      "mapping": "table_1"
    },
    {
      "remoteSchema": "CaseSensitiveName",
      "remoteTable": "TABLEX",
      "mapping": "table_2"
    }]
}

Queries against one of the tables or schemes defined in the mapping attributes are run against the corresponding remote entity. For example, a query against tables in the case_insensitive_1 schema is forwarded to the CaseSensitiveName schema and a query against case_insensitive_2 is forwarded to the cASEsENSITIVEnAME schema.

At the table mapping level, a query on case_insensitive_1.table_1 as configured above is forwarded to CaseSensitiveName.tablex, and a query on case_insensitive_1.table_2 is forwarded to CaseSensitiveName.TABLEX.

By default, when a change is made to the mapping configuration file, Trino must be restarted to load the changes. Optionally, you can set the case-insensitive-name-mapping.refresh-period to have Trino refresh the properties without requiring a restart:

case-insensitive-name-mapping.refresh-period=30s

Type mapping#

Because Trino and Exasol each support types that the other does not, this connector modifies some types when reading data. Data types may not map the same way in both directions between Trino and the data source. Refer to the following sections for type mapping in each direction.

Exasol to Trino type mapping#

Trino supports selecting Exasol database types. This table shows the Exasol to Trino data type mapping:

Exasol to Trino type mapping#

Exasol database type

Trino type

Notes

BOOLEAN

BOOLEAN

DOUBLE PRECISION

REAL

DECIMAL(p, s)

DECIMAL(p, s)

See Mapping numeric types

CHAR(n)

CHAR(n)

VARCHAR(n)

VARCHAR(n)

DATE

DATE

No other types are supported.

Mapping numeric types#

An Exasol DECIMAL(p, s) maps to Trino’s DECIMAL(p, s) and vice versa except in these conditions:

  • No precision is specified for the column (example: DECIMAL or DECIMAL(*)).

  • Scale (s) is greater than precision.

  • Precision (p) is greater than 36.

  • Scale is negative.

Mapping character types#

Trino’s VARCHAR(n) maps to VARCHAR(n) and vice versa if n is no greater than 2000000. Exasol does not support longer values. If no length is specified, the connector uses 2000000.

Trino’s CHAR(n) maps to CHAR(n) and vice versa if n is no greater than 2000. Exasol does not support longer values.

Type mapping configuration properties#

The following properties can be used to configure how data types from the connected data source are mapped to Trino data types and how the metadata is cached in Trino.

Property name

Description

Default value

unsupported-type-handling

Configure how unsupported column data types are handled:

  • IGNORE, column is not accessible.

  • CONVERT_TO_VARCHAR, column is converted to unbounded VARCHAR.

The respective catalog session property is unsupported_type_handling.

IGNORE

jdbc-types-mapped-to-varchar

Allow forced mapping of comma separated lists of data types to convert to unbounded VARCHAR

SQL support#

The connector provides globally available and read operation statements to access data and metadata in the Exasol database.

Procedures#

system.flush_metadata_cache()#

Flush JDBC metadata caches. For example, the following system call flushes the metadata caches for all schemas in the example catalog

USE example.example_schema;
CALL system.flush_metadata_cache();

system.execute('query')#

The execute procedure allows you to execute a query in the underlying data source directly. The query must use supported syntax of the connected data source. Use the procedure to access features which are not available in Trino or to execute queries that return no result set and therefore can not be used with the query or raw_query pass-through table function. Typical use cases are statements that create or alter objects, and require native feature such as constraints, default values, automatic identifier creation, or indexes. Queries can also invoke statements that insert, update, or delete data, and do not return any data as a result.

The query text is not parsed by Trino, only passed through, and therefore only subject to any security or access control of the underlying data source.

The following example sets the current database to the example_schema of the example catalog. Then it calls the procedure in that schema to drop the default value from your_column on your_table table using the standard SQL syntax in the parameter value assigned for query:

USE example.example_schema;
CALL system.execute(query => 'ALTER TABLE your_table ALTER COLUMN your_column DROP DEFAULT');

Verify that the specific database supports this syntax, and adapt as necessary based on the documentation for the specific connected database and database version.

Table functions#

The connector provides specific table functions to access Exasol.

query(varchar) -> table#

The query function allows you to query the underlying database directly. It requires syntax native to Exasol, because the full query is pushed down and processed in Exasol. This can be useful for accessing native features which are not available in Trino or for improving query performance in situations where running a query natively may be faster.

The native query passed to the underlying data source is required to return a table as a result set. Only the data source performs validation or security checks for these queries using its own configuration. Trino does not perform these tasks. Only use passthrough queries to read data.

As a simple example, query the example catalog and select an entire table::

SELECT
  *
FROM
  TABLE(
    example.system.query(
      query => 'SELECT
        *
      FROM
        tpch.nation'
    )
  );

As a practical example, you can use the WINDOW clause from Exasol:

SELECT
  *
FROM
  TABLE(
    example.system.query(
      query => 'SELECT
        id, department, hire_date, starting_salary,
        AVG(starting_salary) OVER w2 AVG,
        MIN(starting_salary) OVER w2 MIN_STARTING_SALARY,
        MAX(starting_salary) OVER (w1 ORDER BY hire_date)
      FROM employee_table
      WINDOW w1 as (PARTITION BY department), w2 as (w1 ORDER BY hire_date)
      ORDER BY department, hire_date'
    )
  );

Note

The query engine does not preserve the order of the results of this function. If the passed query contains an ORDER BY clause, the function result may not be ordered as expected.